Asbestos Air Testing and Clearance in Liverpool

Air testing shows whether asbestos fibres are present in the air at a measurable level, and after licensed removal it is part of the formal process that decides when an area can be used again.

Call 07777 659786

Get help with this

We only use your details to reply to this enquiry. Privacy policy

Asbestos air testing measures the concentration of airborne fibres in a space. It is used for four-stage clearance after licensed asbestos removal, for reassurance after an incident or smaller job, and for background or leak monitoring during works. In each case the testing should be carried out by an independent analyst accredited by UKAS, not by the contractor who did the removal. We arrange air testing across Liverpool and Merseyside and explain the results.

What is asbestos air testing?

An analyst draws a measured volume of air through a filter using a calibrated pump. The filter is then examined under a microscope and the fibres counted, giving a result in fibres per cubic centimetre of air. The method counts fibres of a defined size range; standard fibre counting does not by itself tell asbestos fibres apart from other fibres, which is one reason a visual inspection is always part of clearance.

Air testing is not the same as testing a material sample. If you want to know whether a ceiling, board or floor tile contains asbestos, that needs a bulk sample analysed by a UKAS-accredited laboratory. Air testing answers a different question: is there a measurable level of fibres in the air right now?

When is air testing used?

  • Four-stage clearanceRequired after licensed removal inside an enclosure, before the area can be reoccupied.
  • Reassurance testingAfter non-licensed work, a minor incident or a clean-up, to support the decision that a space is fit for use.
  • Background monitoringBefore work starts, to record the baseline in and around the area.
  • Leak monitoringOutside an enclosure during licensed work, to check that controls are working.

Separately, licensed contractors carry out personal monitoring of their own workers’ exposure. That is part of the contractor’s duties rather than an independent check, and it is measured against the control limit of 0.1 fibres per cm³ of air averaged over four hours set by the Control of Asbestos Regulations 2012.

What happens in a four-stage clearance?

Four-stage clearance is set out in HSE guidance HSG248, “Asbestos: The analysts’ guide”. After licensed asbestos removal inside an enclosure, an independent UKAS-accredited analyst works through:

  1. Preliminary check of site condition and job completeness. Has all the asbestos in scope been removed? Is the enclosure intact and are the airlocks and waste routes in order?
  2. Thorough visual inspection. Inside the enclosure, checking surfaces, ledges, fixings and corners for any remaining debris or dust. If residue is found, the area is cleaned again and re-inspected.
  3. Air monitoring. Only once the area passes the visual inspection. The air is disturbed to simulate use and sampled to check fibre levels are below the clearance indicator.
  4. Final assessment after the enclosure is removed. The analyst checks the area again once the enclosure has been dismantled, to make sure nothing has been left behind or released.

When all four stages are passed, the analyst issues a certificate of reoccupation. Keep this with your building records and, where relevant, your asbestos register.

The visual inspection matters as much as the air test. An area that looks clean but has debris hidden on ledges or behind fixings should not pass, whatever the air result. That is why the analyst must be independent of the removal contractor.

Reassurance testing after a smaller job or incident

Not every job involves an enclosure and formal clearance. Removing an intact asbestos cement garage roof, taking out a few floor tiles by hand or dealing with minor drilling into a textured ceiling may be non-licensed work. In some of those cases, especially indoors or in a home with children or vulnerable occupants, an independent visual inspection and reassurance air test can give extra confidence before the room is used again.

Reassurance testing is also common after an incident, such as a contractor accidentally cutting into a board, where the area has been cleaned and the occupier wants independent evidence. Our asbestos clean-up page explains how those situations are handled.

How do we arrange air testing?

When you call, we ask what work has taken place or is planned, what material is involved, the size of the area and whether the building is occupied. We then arrange an independent UKAS-accredited analyst and explain what the visit will involve. If the testing is part of a removal job we are coordinating, it is built into the plan from the start, so the clearance happens as soon as the area is ready. We do not promise results in advance: the outcome depends on what the analyst finds on the day.

Areas covered

We arrange air testing across Liverpool and Merseyside, including commercial premises in the city centre and homes in areas such as West Derby and Huyton. Air testing is one part of a complete asbestos removal service across Merseyside, and our overview of asbestos removal and surveys in Liverpool sets out how surveys, removal and clearance fit together.

Need air testing or a clearance arranged?

Call 07777 659786 and tell us what work has been done or is planned, where, and the material involved. We will explain which type of testing applies and arrange an independent analyst.

Frequently asked questions

Who can carry out an asbestos clearance certificate?

Four-stage clearance after licensed removal must be carried out by an independent analyst accredited by UKAS, not by the removal contractor. The analyst issues a certificate of reoccupation once all four stages are passed. We arrange the analyst as part of any licensed job we coordinate.

Is an air test enough to show a room is safe after asbestos removal?

Not on its own. Under HSG248, air monitoring only happens after a thorough visual inspection has been passed. Debris on surfaces can be missed by an air test taken at one moment, so the visual check and final assessment are just as important.

Do I need air testing after removing an asbestos garage roof?

Careful removal of intact asbestos cement sheets outdoors is usually non-licensed work, and four-stage clearance is not required. Reassurance testing is sometimes chosen for peace of mind, particularly if sheets were broken. We will tell you honestly whether it adds value for your job.

What is the asbestos control limit?

The control limit set by the Control of Asbestos Regulations 2012 is 0.1 fibres per cm³ of air, averaged over four hours. It is a legal limit for worker exposure, not a safe level, and employers must keep exposure as low as reasonably practicable below it.

Can air testing tell me whether my ceiling contains asbestos?

No. Air testing measures fibres in the air. To find out whether a ceiling, board or tile contains asbestos, a sample of the material needs analysing by a UKAS-accredited lab. Our asbestos survey and sampling services cover that.

Call 07777 659786