An asbestos survey finds and records asbestos-containing materials (ACMs) in a building, assesses their condition and tells you what to do about them. HSE guidance HSG264 describes two main types: a management survey for buildings in normal use, and a refurbishment and demolition survey before building work. Which one you need depends on the property and what you plan to do with it. We help you choose, arrange the survey with a competent surveyor and talk you through the results.
What is an asbestos survey?
A survey is a structured inspection by a trained surveyor who looks for materials that may contain asbestos, takes samples (or presumes a material contains asbestos where sampling is not practical), and records what was found, where, how much and in what condition. Samples go to a laboratory accredited by UKAS to ISO/IEC 17025, where they are analysed under polarised light microscopy. Nobody can confirm asbestos by eye, however experienced, so a survey is the reliable way to get an answer for a whole building rather than one material.
The finished report normally includes a register of the ACMs found or presumed, photographs, plans or location descriptions, laboratory results and a material assessment for each item that helps decide whether it can be left and managed or should be removed. It is a working document: it guides contractors, informs a management plan, and protects anyone who may later drill, cut or lift something in the building.
Which type of asbestos survey do you need?
| Survey | When it is used | How intrusive |
|---|---|---|
| Management survey | Buildings in normal occupation; meeting the duty to manage in non-domestic premises and common parts of flats | Minimally intrusive; accessible areas, some sampling |
| Refurbishment and demolition survey | Before refurbishment, rewiring, a new kitchen or bathroom, structural alterations or demolition | Fully intrusive in the area of work; the area is usually vacated |
| Targeted sampling | One or a few specific materials, such as a textured ceiling or an old floor | Limited to the material in question |
For a factory unit, office, shop or the shared hallways of a block of flats in use day to day, the starting point is usually a management survey. If walls are coming out, ceilings are coming down or a building is being stripped back, a management survey is not enough: HSE expects a refurbishment and demolition survey covering the area of work before it starts. If you just want to know about one material, asbestos testing and sampling is often the simpler, more proportionate route.
Who needs an asbestos survey?
- Owners and managers of non-domestic buildingsUnder regulation 4 of the Control of Asbestos Regulations 2012, the duty holder must find out whether asbestos is present and manage the risk. A survey is the usual way to do that.
- Landlords and managing agentsThe common parts of purpose-built flats and houses converted into flats fall under the duty to manage. Our page on asbestos surveys for landlords covers rented homes and HMOs in more depth.
- Homeowners planning workThe duty to manage does not apply inside an owner-occupied house, but anyone renovating a pre-2000 home should know what they are disturbing before builders start.
- BuyersSome buyers want clarity on a specific material before exchange. Our asbestos checks for buyers page explains what is realistic before you own the property.
- Contractors and developersBuilders, electricians and demolition firms need survey information for the area they will work in so they can plan safely.
When is a survey not the answer?
A full survey is not always proportionate. If the only question is whether the textured coating on one ceiling or the cement sheets on one garage contain asbestos, a sample of that material may answer it faster and more simply. On the other hand, if you are about to gut a kitchen, a single sample will not tell you about the floor tiles under the vinyl, the panel behind the old boiler or the board lining the airing cupboard. We will tell you honestly which approach fits what you are trying to do.
While you wait for a survey or results, do not drill, sand, scrape, cut or break any material you are unsure about. If something suspected of containing asbestos has already been damaged, keep people and pets out of the room, close the door and do not sweep or use a household vacuum on the debris.
How we arrange an asbestos survey
- Initial call. We ask what kind of building it is, roughly when it was built or last refurbished, which areas matter and what you plan to do: keep using it, renovate, sell, let or demolish.
- Recommend the survey type. We explain whether you need a management survey, a refurbishment and demolition survey, targeted sampling, or a mix across different parts of the building.
- Written quote. You get a quote that sets out the scope, the areas included and anything that may be excluded or limited, such as locked rooms or areas that cannot be safely reached.
- Survey visit. The survey is carried out by a competent surveyor; we recommend one accredited by UKAS to ISO/IEC 17020. Samples are taken under controlled conditions and sealed.
- Laboratory analysis. Samples are analysed by a UKAS-accredited laboratory (ISO/IEC 17025). Results often take a few working days, depending on the number of samples.
- Report explained. We go through the report with you in plain English and explain the options for each material: leave and monitor, encapsulate, or remove, and whether removal would be non-licensed, notifiable or licensed work.
Asbestos surveys across Liverpool and Merseyside
Much of the region’s building stock dates from before 2000, which is the point UKHSA uses as a guide: any building built or refurbished before then may contain asbestos. The material differs by building type. Victorian and Edwardian terraces in areas such as Wavertree were often modernised in the 1960s to 1980s, which is when textured ceilings, insulating board panels and thermoplastic floor tiles went in. Inter-war and post-war semis in places like Crosby often have asbestos cement garage roofs, soffits or flue pipes. Older commercial, industrial and dock-side premises, from the city centre to Birkenhead, can have a wider range, including insulation and lagging in plant rooms.
Wherever the building is, the approach is the same: understand the plans for it, survey to the right standard, and give you a clear picture of what is there. If the survey does find material that needs to go, we can plan the next stage as part of our wider service for asbestos removal in Liverpool.
What affects the cost of an asbestos survey?
We do not publish fixed prices because every building is different. The main factors are the size of the property and the number of rooms or units, the type of survey (a refurbishment and demolition survey takes longer and is more intrusive), the number of samples sent to the lab, access to roof voids, risers and plant areas, and whether the area needs to be vacated. Our asbestos removal cost guide explains how surveys fit into the wider cost of dealing with asbestos.
What happens after the survey?
For many buildings, the outcome is reassuring: materials are in good condition, can be left in place and recorded, and simply need checking periodically. Where the duty to manage applies, the findings feed into an asbestos register and management plan. Where materials are damaged or in the way of planned works, we explain the removal route and the notice periods involved: licensable work must be notified to the enforcing authority on form ASB5 at least 14 days before it starts, and is only ever carried out by an HSE-licensed contractor. As local asbestos specialists, we coordinate those steps so the survey leads somewhere useful rather than sitting in a drawer.
Need to know what is in your building?
Call 07777 659786 or leave your details. Tell us the type of property, roughly when it was built and what you are planning, and we will call you back to recommend the right survey.
Frequently asked questions
What is the difference between a management survey and a refurbishment survey?
A management survey locates asbestos that could be disturbed during normal use and maintenance of a building, and is minimally intrusive. A refurbishment and demolition survey is fully intrusive in the area where work will happen, looking behind panels, under floors and into the structure, and is needed before any refurbishment or demolition. One does not replace the other.
Do I need an asbestos survey for my house?
There is no general legal requirement for owner-occupiers to survey their own home. But if the house was built or refurbished before 2000 and you are planning work that will disturb walls, ceilings, floors or the loft, knowing what is there first protects you, your family and the trades you hire. Often targeted sampling is enough.
How long does an asbestos survey take?
It depends on the size of the building and the type of survey. A small house may take a few hours on site, while a larger commercial building or an intrusive refurbishment survey can take much longer. Laboratory results then usually follow within a few working days, and the report is issued after that.
Can a surveyor tell if something is asbestos just by looking?
No. A surveyor can recognise materials that are likely to contain asbestos, but confirmation needs a sample analysed by a UKAS-accredited laboratory. Where a material cannot be sampled, a survey may presume it contains asbestos and treat it accordingly until it is tested.
Who should carry out an asbestos survey?
HSE recommends using a surveyor who can demonstrate competence. Accreditation by UKAS to ISO/IEC 17020 for the surveying organisation, or personnel certification for the individual, is the recognised benchmark. Samples should be analysed by a laboratory accredited to ISO/IEC 17025. We arrange surveys on that basis.
Does finding asbestos mean it has to be removed?
Not necessarily. HSE guidance says asbestos in good condition that will not be disturbed is often safest left in place, recorded and monitored. Removal makes sense when material is damaged or will be disturbed by planned work. Our local asbestos specialists explain which option suits each material in your report.