Asbestos insulating board (AIB) is a lightweight board that was used for fire protection, insulation and partitioning in buildings from the 1950s until the early 1980s. It has a higher asbestos content than asbestos cement and releases fibres more easily, so most work on it is licensable under the Control of Asbestos Regulations 2012 and must be carried out by an HSE-licensed contractor. We arrange testing to confirm what the board is, plan the removal and notice period, and organise independent four-stage clearance before the area is reoccupied.
What is asbestos insulating board?
AIB was made in flat sheets, often around the size of a standard plasterboard sheet or cut into panels and tiles. Its appeal was fire resistance and light weight. Compared with asbestos cement, which is hard and dense, AIB is softer, more porous and more easily broken, scored or drilled. Those same properties mean it releases fibres more readily when disturbed, which is why HSE puts most AIB work into the licensed category.
It is often painted or covered, so it can look like plasterboard or cement sheet. The only way to know is sampling and analysis by a UKAS-accredited laboratory to ISO/IEC 17025.
Where is AIB found in Liverpool homes and buildings?
- Ceilings and ceiling tilesFlat board ceilings in extensions, flats and integral garages, and suspended ceiling tiles in offices and schools.
- Airing cupboardsLinings around hot water cylinders and boilers, and the boxing around pipework.
- Behind heaters and firesPanels behind storage heaters, gas fires and old fireplaces, used as heat protection.
- Partitions and wall panelsInternal walls, infill panels under windows and boxing-in.
- Fire doorsLinings within or on fire doors, and fire-break panels in service risers.
- Soffits and exterior panelsSome soffits and infill panels on houses and flats. Our soffit removal page explains why testing these first matters.
Houses built or refurbished in the 1950s to 1970s, including many post-war estates in Kirkby and Huyton, can have AIB in airing cupboards, behind heaters and as ceiling boards. Victorian conversions into flats in Southport and Birkenhead sometimes have AIB used as fire separation between flats, which matters for landlords with a duty to manage the common parts. Older offices and industrial units across Merseyside regularly contain AIB ceiling tiles and partitions.
Is AIB removal always licensed?
Most work on AIB is licensed. HSE's exception is short-duration work: as an example, no more than two hours in any seven days, with no one person working on it for more than one hour in that time. Minor, short-duration removal of AIB in refurbishment can fall into notifiable non-licensed work (NNLW) within those limits. Anything larger, such as taking out a ceiling, stripping an airing cupboard or removing several panels, will normally be licensable. Even drilling into AIB to fix a shelf or run a cable can release fibres, which is why trades are told to check before working on boards in older buildings.
Because the category depends on the job as well as the material, we work it out with you. Our licensed asbestos removal page covers the process in full, including the ASB5 notification at least 14 days before work.
Do not drill, cut, sand, break or prise off boards you suspect are AIB, and do not try to take a sample yourself. If a board is already damaged or has been knocked through, keep people out of the area, close the door, do not vacuum or sweep and call for advice.
How AIB removal is planned and carried out
- Identify the board. We arrange sampling and laboratory analysis, or a refurbishment and demolition survey if wider works are planned.
- Confirm category and timing. We explain whether the job is licensable or short-duration NNLW and build in the 14-day ASB5 notice where it applies.
- Written quote. You get a written quote setting out the boards to be removed, the controls and what will be left afterwards.
- Enclosure and controls. The HSE-licensed contractor sets up a sealed enclosure under negative pressure with filtered extraction, an airlock and a decontamination unit.
- Careful removal. Boards are wetted where suitable and unscrewed or eased off whole rather than broken, then double-wrapped and labelled.
- Four-stage clearance. An independent UKAS-accredited analyst checks completeness, carries out a thorough visual inspection, takes air samples and makes a final assessment. A certificate of reoccupation is issued when the area passes. Our air testing and clearance page explains this stage.
- Waste paperwork. Waste goes with a registered carrier to a permitted site under a hazardous waste consignment note.
Can AIB be left in place?
Sometimes. If the board is in good condition, sealed or painted, and nothing is going to disturb it, leaving it in place and managing it can be the safer choice. Encapsulation of sound AIB is listed by HSE as non-licensed work. The board then needs to be recorded and checked periodically, and anyone working nearby needs to know it is there. Removal is the better answer when boards are damaged, when they are in the way of a kitchen, bathroom or rewiring job, or when a building is being stripped out or demolished. We will tell you honestly which applies.
What affects the cost of AIB removal?
Because AIB work is usually licensed, the costs include the enclosure, air extraction, decontamination unit, notification, the independent analyst and clearance, alongside the removal itself. The quantity and location of board, height and access, whether the property is occupied, the waste volume and any making good afterwards all affect the price. A single airing cupboard is a very different job from a ceiling across a whole flat. Our cost guide sets out the factors, and we confirm the price in writing.
AIB is one of the materials where getting the category right matters most, for your health and for the legal side of the job. If you are unsure what a board is, talk to us before anyone touches it. It is a core part of our asbestos removal service in Liverpool, and the same careful approach applies wherever our asbestos specialists covering Merseyside are working.
Think you have AIB?
Call 07777 659786 or leave your details. Tell us where the board is, its condition and what work is planned, and we will call back to arrange testing and explain the licensed removal process.
Frequently asked questions
How do I know if a board is AIB or plasterboard?
It is very hard to tell by eye, especially once painted. AIB tends to be softer and lighter than asbestos cement and does not have the paper facing of plasterboard, but these are not reliable checks. A sample analysed by a UKAS-accredited laboratory is the only way to be sure. Please do not break or drill the board to look.
Why is AIB more dangerous than asbestos cement?
AIB generally contains more asbestos and is softer and more porous than asbestos cement, so it releases fibres more readily when it is cut, broken, drilled or sanded. That is why HSE treats most work on AIB as licensed, while intact asbestos cement removed carefully is usually non-licensed.
Can I drill into AIB to put up a shelf?
It is best not to. Drilling AIB releases fibres, and even small tasks are covered by the regulations. If you suspect a board is AIB, get it tested first. If it is, we can talk through fixing elsewhere, sealing the board, or removal if it is in the way.
Is there AIB in my airing cupboard?
It is possible in homes built or refurbished from the 1950s to the early 1980s, where AIB was used to line cupboards around boilers and cylinders. Many airing cupboards contain ordinary board instead. Testing confirms which. If you are planning a new boiler or cylinder, tell the installer and get it checked first.
How long does AIB removal take?
Licensed work cannot start until at least 14 days after ASB5 notification. The removal itself may take from a day for a small cupboard to longer for ceilings or partitions, plus time for enclosure set-up and four-stage clearance. We give you a realistic timetable once the scope is known.
Do landlords have to remove AIB?
Not necessarily. Duty holders must manage asbestos in non-domestic premises and common parts, and landlords should know about and manage risks in rented homes. Sound AIB can often be managed in place. Check current HSE guidance or take advice. Our landlord survey page has more.