Asbestos Testing and Sampling in Liverpool

Worried about one ceiling, one floor or one garage roof? Sampling the material and having it analysed in a laboratory is the only reliable way to know whether it contains asbestos.

Call 07777 659786

Get help with this

We only use your details to reply to this enquiry. Privacy policy

Asbestos testing means taking a small sample of a suspect material under controlled conditions and sending it to a laboratory accredited by UKAS to ISO/IEC 17025, where it is analysed by polarised light microscopy. The result tells you whether asbestos is present and, if so, which type, such as chrysotile (white), amosite (brown) or crocidolite (blue). It is the quickest proportionate answer when you are worried about a specific material rather than a whole building.

Why can’t you tell asbestos by looking?

Asbestos fibres were mixed into hundreds of products, from cement sheets and textured coatings to floor tiles, insulating boards and the rope seals in old boilers. In most of these the fibres are bound into the material and invisible. Two ceilings that look identical can give opposite results: one coating applied in the 1970s may contain chrysotile, while a similar finish from a later decade does not. Age helps as a guide, because UKHSA advises that any building built or refurbished before 2000 may contain asbestos, but it cannot settle the question. Only laboratory analysis can.

That matters both ways. Treating a harmless material as asbestos can cost you time and money; treating an asbestos material as harmless can expose you, your family or your builders to fibres. A test removes the guesswork before anyone drills, sands or breaks anything.

Which materials do people ask us to test?

  • Textured ceilings and wallsArtex-type coatings are among the most common requests, usually before re-plastering or rewiring. See our Artex and textured coatings page for what happens if the result is positive.
  • Floor tiles and black adhesiveThermoplastic and vinyl tiles, and the bitumen mastic beneath them, are often found when old carpets come up. Our asbestos floor tile removal page covers the options.
  • Garage roofs and shedsCorrugated cement sheets on garages, sheds and lean-tos are often tested before a replacement roof is quoted.
  • Boards and panelsPanels in ceilings, airing cupboards, behind storage heaters and fires, around boxed-in pipes and on fire-door linings may be asbestos insulating board.
  • Soffits, flues and water tanksSoffits can be asbestos cement or insulating board, and the difference matters a great deal for removal. Old flue pipes and loft water tanks are frequently cement products.
  • Debris and dustAfter accidental damage, a bulk or dust sample can show whether the debris contains fibres, which shapes the clean-up.

Bulk sampling and air testing: what is the difference?

Most testing is bulk sampling: a small piece of the material itself is analysed to identify whether it contains asbestos. That is what most homeowners, landlords and contractors need. Air testing is different: it measures airborne fibres in a room, and is used for clearance after licensed removal, reassurance after an incident, or monitoring during work. If you need to know whether a space is safe to reoccupy rather than what a material is made of, our page on air testing and clearance explains how that works and why it is carried out by an independent analyst.

Please do not take samples yourself. Breaking off a piece of a material that turns out to contain asbestos can release fibres in your home. Sampling is non-licensed work, but it still needs trained people, controls and the right equipment. Until you have a result, leave the material alone and avoid drilling, sanding or scraping it.

How our asbestos testing works

  1. Tell us about the material. We ask what it is, where it is, its condition, roughly when the property was built or refurbished, and why you need to know: renovation, sale, a damaged area or general worry.
  2. Decide what to sample. We suggest which materials are worth testing and whether a few samples will answer the question or whether a fuller asbestos survey would be more sensible for the work you are planning.
  3. Written quote. You get a quote for the visit and the number of samples.
  4. Controlled sampling. Samples are taken carefully to keep fibre release to a minimum. The area is wetted where suitable, each sample is sealed and labelled, and the sample point is sealed afterwards.
  5. Laboratory analysis. Samples go to a UKAS-accredited laboratory (ISO/IEC 17025). Results often come back within a few working days.
  6. Results in plain English. We explain what the certificate says, what it means for your plans and whether any follow-up work would be non-licensed, notifiable non-licensed or licensed.

Testing in Liverpool homes and buildings

The materials we are asked about vary across the region. In the dense terraces of Walton, many of them rented, it is often a textured ceiling, a board behind an old fire or tiles under a kitchen floor that were added during a 1970s or 1980s modernisation. In the inter-war semis of Allerton, a detached garage roof or cement soffit is a frequent question before work goes ahead. Around St Helens and other towns with older industrial premises, business owners may need sampling to support a wider management survey. Whatever the property, a sample turns a worry into a fact you can plan around, and our asbestos specialists in Liverpool can take it from there if removal is needed.

What happens if the test is positive?

A positive result is not a reason to panic. HSE guidance is that asbestos materials in good condition that will not be disturbed are often safest left in place and managed. If you plan to work on or near the material, or it is damaged, the next step is to decide how it should be dealt with. Small, intact cement products may be removed as non-licensed work; some coatings and boards are notifiable; others, such as most insulating board and pipe lagging, are licensable and can only be removed by an HSE-licensed contractor after a 14-day notification on form ASB5. We explain which applies and can quote and coordinate the work as part of our asbestos removal across Merseyside.

A negative result is equally useful: it lets your builder, plasterer or flooring fitter get on with the job with confidence, and gives you a record to keep with the property’s paperwork. Our asbestos in the home guide explains where else asbestos tends to turn up, if you want to think about the rest of the house.

Want a material tested?

Call 07777 659786 or leave your details. Tell us what the material is, where it is and what you are planning, and we will call you back to arrange sampling.

Frequently asked questions

How long do asbestos test results take?

Results from a UKAS-accredited laboratory often come back within a few working days of the samples arriving, although this depends on the laboratory and the number of samples. We tell you the expected timescale when we arrange the visit and explain the results as soon as they are in.

Can I use a home asbestos testing kit?

Kits rely on you taking the sample yourself, which means breaking into a material that might contain asbestos without training or controls. That can release fibres in your home. We advise having samples taken by someone trained to do it, then analysed by a UKAS-accredited laboratory.

How many samples do I need?

Usually one sample per distinct material, for example one from a textured ceiling and one from the floor tiles. Different rooms may have been decorated at different times, so a coating in one room does not always match another. We suggest a sensible number based on what you describe.

Does a test tell me what type of asbestos it is?

Yes. Laboratory analysis identifies the fibre type, such as chrysotile, amosite or crocidolite. All types are hazardous, but the type, together with the material and its condition, helps decide whether any removal would be non-licensed, notifiable or licensed work.

What should I do if I have already drilled or sanded a suspect material?

Stop work, keep people and pets out of the area and close the door. Do not sweep, dust or use a household vacuum on the debris. Then call us to arrange sampling. If you are worried about your health after exposure, speak to your GP.

Does a negative result mean the whole house is free of asbestos?

No. A test result applies only to the material sampled. Other materials in the same property, installed at different times, can still contain asbestos. If you are planning wider works, a refurbishment survey of the area may be more appropriate than individual samples.

Call 07777 659786